Tax included
Shipping calculated at checkout
Out of stock
The Lindr Pygmy 25/K Green Line Draught Dispenser is a compact single-tap beer dispenser with built-in cooler and air compressor, capable of cooling and dispensing up to 30 litres per hour.
Using dry cooling technology, the Pygmy 25/K requires no water or ice to operate and can be ready to dispense chilled draught beer within approximately 2–4 minutes of switching on.
The integrated compressor makes it particularly suitable for KeyKeg and compatible bag-type kegs, while conventional steel beer kegs can also be connected using the correct keg coupler and beverage gas setup.
The 25/K model features an integrated air compressor, removing the need for a separate external compressor when using suitable keg types.
For KeyKeg and compatible bag-type kegs, compressed air acts on the outside of the internal product bag and remains separated from the drink. These keg types can therefore be dispensed using the built-in compressor without requiring a separate beverage gas cylinder.
For conventional steel kegs, compressed air comes into contact with the product and should only be considered for short-term dispensing. For longer-term storage and dispense, use the correct CO2 or mixed beverage gas for the drink.
The Lindr Pygmy 25/K provides a rated output of up to 30 litres per hour, giving it additional cooling capacity while retaining the compact dimensions of the Pygmy range.
It is particularly suitable for:
Actual dispense capacity will depend on factors including incoming product temperature, ambient temperature and required serving temperature.
The Lindr Pygmy 25/K uses dry cooling technology, so there is no water tank to fill and no ice bank to build before use.
Cooling time is approximately 2–4 minutes, making the dispenser quick to set up when required for temporary or portable draught installations.
The Pygmy 25/K features a single draught tap, providing one dispense point for a compatible kegged product.
Depending on the complete dispense setup, it can be used for compatible:
The correct keg coupler, pipework, pressure and gas arrangement must be used for the particular keg and product being served.
Measuring just 170mm wide and weighing approximately 16.5kg, the Lindr Pygmy 25/K combines cooling, dispense and an air compressor within a compact countertop unit.
Its small footprint makes it particularly useful for locations where space is limited or where a permanent cellar cooling system is not required.
The dispenser is supplied with:
Required pipework and connections can be supplied when purchasing the dispenser together with the appropriate keg coupler.
Depending on your keg and intended use, you may also require:
The exact equipment required will depend on the keg valve and product being dispensed.
The built-in compressor is particularly useful with KeyKeg and compatible bag-type kegs, where compressed air remains separated from the drink.
Conventional steel kegs can be dispensed using compressed air for short-term applications, but introducing air into the keg will affect the product over time. For longer-term use, connect the dispenser using the correct beverage gas and regulator.
Always confirm the correct keg coupler, dispense pressure and gas requirements for the product before connecting the keg.
