The Lindr 40/K Green Line Twin Tap Draught Dispenser is a compact two-tap beer dispenser with an integrated dry cooler and built-in air compressor, designed for home bars, events, mobile bars and professional draught dispense applications.
With a continuous cooling output of approximately 35–40 litres per hour and a maximum output of up to 50 litres per hour, the Lindr 40/K provides two draught dispense points from a portable countertop unit.
The built-in compressor makes the 40/K particularly suitable for KeyKeg and compatible bag-type kegs, while conventional steel kegs can be connected using the correct keg couplers and beverage gas system.
The Lindr 40/K features two draught taps, allowing two compatible kegged products to be connected and dispensed from the same machine.
Depending on the complete dispense setup, the two taps can be used for compatible:
Each product should be connected using the correct keg coupler, pipework, pressure and gas arrangement for the particular keg and drink.
The Lindr 40/K provides approximately 35–40 litres per hour of continuous cooling capacity, with a maximum rated output of up to 50 litres per hour under suitable operating conditions.
This makes it suitable for applications requiring more capacity than a smaller single-tap dispenser while retaining a compact countertop format.
The 40/K model includes an integrated adjustable air compressor, removing the need for a separate external compressor.
For KeyKeg and compatible bag-type kegs, compressed air acts on the outside of the internal product bag and remains separated from the drink. This allows these keg types to be dispensed using the built-in compressor without requiring a separate beverage gas cylinder.
For conventional steel kegs, compressed air comes into contact with the drink and is therefore only recommended for short-term dispensing. For longer-term storage and dispense, use the correct CO2 or mixed beverage gas for the product.
The Lindr 40/K uses dry cooling technology, so there is no water tank to fill and no ice bank to build before dispensing.
This makes setup quicker than traditional water-bath coolers and also reduces the preparation required when moving the dispenser between locations.
The combination of two taps, integrated cooling and built-in compressor makes the Lindr 40/K suitable for:
The Lindr 40/K can also be supplied with custom vinyl branding, making it suitable for breweries, drinks brands, event companies and promotional use.
Contact us for information on artwork requirements, pricing and lead times for custom vinyl-wrapped dispensers.
All necessary pipework can be supplied when purchasing the dispenser together with the appropriate keg coupler or couplers.
Keg valve types vary between breweries and products, so make sure the correct coupler is selected for each keg being used.
Depending on the kegs and products being served, you may also require:
The exact equipment required will depend on the keg type and product being dispensed.
The built-in compressor is particularly useful with KeyKeg and other compatible bag-type kegs, where compressed air remains separated from the drink.
Conventional steel kegs can be dispensed using air for short-term applications, but introducing air into the keg will affect the product over time. For longer-term use, connect the dispenser using the correct beverage gas and regulator for the drink being served.
Always confirm the correct keg coupler, dispense pressure and gas requirements before connecting a keg.
