The Lindr Pygmy 20/K Green Line Draught Dispenser is a compact single-tap beer dispenser with built-in cooler and adjustable air compressor, capable of dispensing up to 20 litres per hour.
Using dry cooling technology, the Pygmy 20/K requires no water or ice to operate and can be ready to dispense chilled draught beer within approximately 2–4 minutes of switching on.
The built-in compressor makes it particularly suitable for KeyKeg and other bag-type kegs, while conventional steel beer kegs can also be connected using the appropriate keg coupler and beverage gas setup.
The 20/K model includes an integrated air compressor, removing the need for a separate external compressor.
For KeyKeg and compatible bag-type kegs, compressed air acts on the outside of the internal product bag and does not come into direct contact with the drink. This means the built-in compressor can be used to dispense these products without requiring a separate gas cylinder.
For conventional steel kegs, compressed air comes into contact with the product and is therefore only recommended for short-term dispensing. For longer-term storage and dispense, use the correct CO2 or mixed beverage gas for the product.
The Lindr Pygmy 20/K has a rated output of up to 20 litres per hour, making it suitable for lower-volume draught dispense applications.
It is particularly suited to:
Unlike traditional water-bath beer coolers, the Lindr Pygmy 20/K uses dry cooling technology.
There is no water tank to fill and no ice bank to build before use. Simply connect the required keg and dispense equipment, switch the unit on and allow approximately 2–4 minutes for the cooler to reach operating temperature.
The Pygmy 20/K features a single draught tap, providing one dispense point for a compatible kegged product.
Depending on the complete dispense setup, it can be used for compatible:
The correct keg coupler, gas arrangement and dispense settings must be used for the particular keg and product.
At just 170mm wide and weighing approximately 16.4kg, the Pygmy 20/K provides draught cooling and dispense in a compact countertop unit.
Its small footprint makes it particularly useful where permanent cellar cooling equipment or a larger remote cooler is not required.
The dispenser is supplied with:
Required pipework can be supplied when purchasing a suitable keg coupler.
Depending on your keg and intended use, you may also require:
The equipment required will depend on the keg valve and product being dispensed.
The built-in compressor is particularly useful with KeyKeg and other compatible bag-type kegs, where the compressed air remains separated from the drink.
Conventional steel kegs can be dispensed using air for short-term applications, but introducing air to the keg will affect the product over time. For longer-term use, connect the dispenser using the correct beverage gas and regulator for the drink being served.
Always confirm the correct keg coupler and gas requirements for your keg before connecting the dispenser.
