The PortaPint 150C XL Triple Tap Draught Beer Dispenser is a high-capacity portable keg dispenser featuring three draught taps, integrated dry cooling and a built-in air compressor.
With a rated cooling output of up to 150 litres or approximately 260 UK pints per hour, this three-tap version of the PortaPint 150C XL is designed for higher-throughput events, mobile bars, festivals, breweries and temporary draught installations.
The three-tap configuration provides additional flexibility where multiple products need to be served or several dispense points are required from one portable cooler.
This version of the PortaPint 150C XL features three draught taps, providing three separate dispense points from a single high-capacity machine.
Depending on the complete dispense setup, the three taps can be connected to compatible:
The taps can be configured for different products or multiple lines of the same product, depending on the requirements of the bar.
Each product should be connected using the correct keg coupler, pipework, pressure and gas arrangement.
The PortaPint 150C XL has a rated cooling output of 150 litres per hour, equivalent to approximately 260 UK pints per hour.
Its combination of high cooling capacity and three dispense points makes it particularly suitable for:
Actual dispense capacity will depend on incoming product temperature, ambient conditions, required serving temperature and operating conditions.
The PortaPint 150C XL features an integrated air compressor, removing the need for a separate external compressor when using suitable keg types.
For KeyKeg and compatible bag-type kegs, compressed air acts on the outside of the internal product bag and remains separated from the drink. These keg types can therefore be dispensed using the built-in compressor without requiring a separate beverage gas cylinder.
For conventional steel kegs, compressed air comes into contact with the drink and is therefore only suitable for short-term dispensing. For longer-term storage and dispense, use the correct CO2 or mixed beverage gas for the product.
The PortaPint 150C XL uses dry cooling technology, so there is no water tank to fill and no ice bank to build before use.
This makes the machine well suited to mobile and temporary bar installations where equipment needs to be transported, positioned and brought into service without setting up a conventional water-cooled ice bank system.
The three-tap configuration provides greater flexibility for event and mobile bar setups.
Depending on the installation, the PortaPint 150C XL can be configured to serve three different compatible kegged drinks, or multiple taps can be used for the same product where additional serving points are required.
This makes the triple-tap version particularly useful for bars requiring a broader drinks selection without installing several separate coolers.
The PortaPint 150C XL can also be supplied with a custom branded vinyl wrap.
Brewery, drinks brand, venue or event artwork can be applied to the body of the dispenser, making branded units suitable for:
Please contact us for current pricing, artwork requirements and lead times for custom branded PortaPint dispensers.
The PortaPint 150C XL Triple Tap is supplied with:
Required pipework can be supplied when purchasing the dispenser together with the appropriate keg coupler or couplers.
The PortaPint 150C XL uses 3/8" beer inlet and compressor air connections, allowing it to be connected using commonly used drinks dispense pipework and compatible push-fit fittings.
Always select the correct keg coupler and connection equipment for each keg being used.
Depending on the kegs and products being served, you may also require:
The exact equipment required will depend on the keg valves and products being dispensed.
The built-in compressor is particularly useful with KeyKeg and compatible bag-type kegs, where compressed air remains separated from the drink.
Conventional steel kegs can be dispensed using compressed air for short-term applications, but introducing air into the keg will affect the product over time. For longer-term use, connect the dispenser using the correct beverage gas and regulator.
Always confirm the correct keg coupler, dispense pressure and gas requirements for each product before connecting the keg.
