The PortaPint 150C XL Twin Tap Draught Beer Dispenser is a high-capacity portable keg dispenser featuring two draught taps, integrated dry cooling and a built-in air compressor.
With a rated cooling output of up to 150 litres or approximately 260 UK pints per hour, the PortaPint 150C XL is designed for higher-throughput events, mobile bars, festivals, breweries and temporary draught installations where greater cooling capacity is required.
Despite its increased capacity, the 150C XL retains the PortaPint dry cooling system, requiring no water bath or ice bank before use.
This variant of the PortaPint 150C XL features two draught taps, providing two separate dispense points from a single high-capacity portable machine.
Depending on the complete dispense setup, the two taps can be connected to compatible:
The outlets can be used for two separate products or multiple lines of the same product, depending on the required bar setup.
Each outlet should be connected using the correct keg coupler, pipework, pressure and gas arrangement for the particular product being served.
The PortaPint 150C XL has a rated cooling output of 150 litres per hour, equivalent to approximately 260 UK pints per hour.
This makes it particularly suitable for:
Actual dispense capacity will depend on incoming product temperature, ambient conditions, required serving temperature and operating conditions.
The PortaPint 150C XL features an integrated air compressor, removing the need for a separate external compressor when using suitable keg types.
For KeyKeg and compatible bag-type kegs, compressed air acts on the outside of the internal product bag and remains separated from the drink. These keg types can therefore be dispensed using the built-in compressor without requiring a separate beverage gas cylinder.
For conventional steel kegs, compressed air comes into contact with the drink and is therefore only suitable for short-term dispensing. For longer-term storage and dispense, use the correct CO2 or mixed beverage gas for the product.
The PortaPint 150C XL uses dry cooling technology, so there is no water tank to fill and no ice bank to build before use.
This makes the dispenser particularly useful for mobile and temporary bar installations where equipment needs to be transported, positioned and brought into service quickly.
This twin-tap PortaPint 150C XL features two 21-metre product cooling coils, providing an extended cooling path for each product before it reaches the tap.
The PortaPint 150C XL can also be supplied with a custom branded vinyl wrap.
Brewery, drinks brand, venue or event artwork can be applied to the body of the dispenser, making branded units suitable for:
Please contact us for current pricing, artwork requirements and lead times for custom branded PortaPint dispensers.
The PortaPint 150C XL is supplied with:
Required pipework can be supplied when purchasing the dispenser together with the appropriate keg coupler or couplers.
Depending on the kegs and products being served, you may also require:
The exact equipment required will depend on the keg valves and products being dispensed.
The built-in compressor is particularly useful with KeyKeg and compatible bag-type kegs, where compressed air remains separated from the drink.
Conventional steel kegs can be dispensed using compressed air for short-term applications, but introducing air into the keg will affect the product over time. For longer-term use, connect the dispenser using the correct beverage gas and regulator.
Always confirm the correct keg coupler, dispense pressure and gas requirements before connecting the keg.
