The PortaPint 25C Nitro+2 is a twin tap nitro cocktail dispenser with an integrated cooler, air compressor and built-in nitrogen infusion system. Designed for dispensing kegged cocktails and nitro cold brew coffee, it can cool and dispense up to 25 litres or approximately 45 UK pints per hour.
Unlike a standard PortaPint 25C, the Nitro+2 incorporates a built-in nitro infuser controlled using the adjustment dial on the front of the machine. The system takes nitrogen from the surrounding atmosphere and mixes it with the product internally, so an external nitrogen gas cylinder is not required for the nitro infusion process.
The dispenser is fitted with two adjustable creamer taps to help produce the characteristic cascading effect and creamy head associated with nitro drinks.
The PortaPint 25C Nitro+2 is designed for compatible kegged draught cocktails, particularly drinks where a smooth, creamy or foamed finish is required.
Suitable applications can include:
The level of nitrogen infusion can be adjusted using the control dial on the front of the machine, allowing the dispense to be adjusted according to the product being served.
The PortaPint Nitro+ system creates its nitrogen supply from the surrounding atmosphere, rather than requiring a separate nitrogen cylinder.
Nitrogen is introduced into the product internally before dispense, helping create the fine bubbles, cascading appearance and creamy texture associated with nitro drinks.
This makes the Nitro+2 particularly useful for mobile and temporary bars where reducing the amount of separate equipment required can simplify setup.
The PortaPint 25C Nitro+2 can also dispense cold brew nitro coffee.
Cold brew coffee can be chilled and nitrogen-infused within the machine before being served through the adjustable creamer taps.
When dispensing cold brew coffee, the temperature control should be set appropriately. Do not set the cooling temperature too low, as coffee and other non-alcoholic products can freeze if excessively chilled.
The Nitro+2 features two adjustable creamer taps, providing two dispense points from the same machine.
The creamer tap design works alongside the internal nitrogen infusion system to help produce the required texture and head at the point of dispense.
The PortaPint 25C Nitro+2 has a rated cooling output of 25 litres per hour, equivalent to approximately 45 UK pints per hour.
Its size and output make it suitable for:
Actual dispense capacity will depend on incoming product temperature, ambient conditions, serving temperature and the product being dispensed.
In addition to the nitro infusion system, the PortaPint 25C Nitro+2 has a built-in air compressor for pressurising compatible keg systems.
The compressor is particularly suitable for KeyKeg and compatible bag-type kegs, where compressed air applies pressure outside the product bag and does not come into direct contact with the drink.
The correct keg type, coupler, pressure and dispense setup should always be confirmed for the cocktail, coffee or other product being served.
The PortaPint 25C Nitro+2 uses dry cooling technology, so there is no water tank to fill or ice bank to build before use.
This makes the machine suitable for portable and temporary installations where quick setup and straightforward transportation are important.
The PortaPint 25C Nitro+2 is supplied with:
Required pipework can be supplied when purchasing the dispenser together with the appropriate keg coupler or couplers.
When using the PortaPint Nitro+2 for cold brew coffee, ensure the cooling control is set to a suitable temperature.
Coffee does not require the same serving temperature as some alcoholic draught products. Setting the thermostat too cold can cause the product to freeze within the cooling system.
