The PortaPint 70C New Shape Twin Tap Draught Beer Dispenser is a higher-capacity portable keg dispenser featuring two draught taps, built-in dry cooling and an integrated air compressor.
With a rated cooling output of up to 80 litres or approximately 140 UK pints per hour, the PortaPint 70C is designed for events, mobile bars, breweries, taprooms and other applications requiring greater dispense capacity from a portable countertop machine.
The New Shape PortaPint 70C requires no water bath and can be ready to serve chilled draught drinks within approximately 5 minutes.
This listing is for the latest New Shape model of the PortaPint 70C.
The 70C provides greater cooling capacity than the smaller PortaPint models while retaining the convenience of an integrated cooler, compressor and twin-tap configuration.
The PortaPint 70C features two draught taps, allowing two compatible kegged products to be connected and served from the same dispenser.
Depending on the complete dispense setup, the two taps can be used for compatible:
Each product should be connected using the correct keg coupler, pipework, pressure and gas arrangement for the particular keg and drink.
The PortaPint 70C has a rated cooling output of 80 litres per hour, equivalent to approximately 140 UK pints per hour.
This increased cooling capacity makes the 70C particularly suitable for:
Actual dispense capacity will depend on factors including incoming product temperature, ambient conditions and required serving temperature.
The PortaPint 70C features an integrated air compressor, removing the need for a separate external compressor when using suitable keg types.
For KeyKeg and compatible bag-type kegs, compressed air acts on the outside of the internal product bag and remains separated from the drink. These keg types can therefore be dispensed using the built-in compressor without requiring a separate beverage gas cylinder.
For conventional steel kegs, compressed air comes into contact with the drink and is therefore only suitable for short-term dispensing. For longer-term storage and dispense, use the correct CO2 or mixed beverage gas for the product.
The PortaPint 70C uses dry cooling technology, so there is no water tank to fill and no ice bank to build before use.
The dispenser can be ready to serve chilled draught drinks within approximately 5 minutes, making it particularly useful for events and temporary installations where quick setup is required.
The PortaPint 70C can also be supplied with a custom branded vinyl wrap.
Brewery, drinks brand, venue or event artwork can be applied to the body of the dispenser, making branded PortaPints suitable for:
Please contact us for current prices, artwork requirements and lead times for custom branded PortaPint dispensers.
The PortaPint 70C is supplied with:
Required pipework can be supplied when purchasing the dispenser together with the appropriate keg coupler or couplers.
The PortaPint 70C uses 3/8" connections for the beer inlets and compressor air outlet, making it compatible with commonly used drinks dispense pipework and suitable fittings.
The correct keg coupler and connections should always be selected for the particular keg being used.
Depending on the kegs and products being served, you may also require:
The exact equipment required will depend on the keg valve and product being dispensed.
The built-in compressor is particularly useful with KeyKeg and compatible bag-type kegs, where compressed air remains separated from the drink.
Conventional steel kegs can be dispensed using compressed air for short-term applications, but introducing air into the keg will affect the product over time. For longer-term use, connect the dispenser using the correct beverage gas and regulator.
Always confirm the correct keg coupler, dispense pressure and gas requirements for the product before connecting the keg.
