The Lindr 155/K Twin Tap Draught Beer Dispenser is a high-capacity portable drinks dispenser featuring two draught taps, powerful dry cooling and a built-in air compressor.
Capable of cooling and dispensing up to 180 litres per hour, the Lindr 155/K is designed for busy events, mobile bars, breweries, taprooms and professional draught dispense applications where greater cooling capacity is required.
The built-in compressor makes the 155/K particularly suitable for KeyKeg and compatible bag-type kegs, while conventional steel kegs can also be connected using the correct keg couplers and beverage gas setup.
The Lindr 155/K features two draught taps, allowing two compatible kegged products to be connected and served from the same dispenser.
Depending on the complete dispense setup, it can be used for compatible:
Each outlet should be connected using the correct keg coupler, pipework, pressure and gas arrangement for the particular product being served.
With a maximum cooling output of up to 180 litres per hour, the Lindr 155/K provides considerably more capacity than smaller portable Lindr dispensers.
This makes it particularly suitable for applications where a compact countertop dispenser is required but serving volumes are higher.
Actual dispense capacity will depend on factors including incoming product temperature, ambient temperature, required serving temperature and operating conditions.
The 155/K features an integrated air compressor, removing the need for a separate external compressor when using suitable keg types.
For KeyKeg and compatible bag-type kegs, compressed air acts on the outside of the internal product bag and remains separated from the drink. These keg types can therefore be dispensed using the built-in compressor without requiring a separate beverage gas cylinder.
For conventional steel kegs, compressed air comes into contact with the product and is only suitable for short-term dispensing. For longer-term storage and dispense, use the correct CO2 or mixed beverage gas for the product.
The Lindr 155/K uses dry cooling technology, so there is no water tank to fill and no ice bank to build before use.
This makes setup quicker and avoids the additional preparation associated with traditional water-bath beer coolers.
The combination of two taps and up to 180 L/hour cooling capacity makes the Lindr 155/K suitable for:
The Lindr 155/K can also be supplied with custom vinyl branding, making it suitable for breweries, drinks brands, event companies and promotional applications.
Contact us for details regarding artwork requirements, pricing and current lead times for custom vinyl-wrapped Lindr dispensers.
Required pipework can be supplied when purchasing the dispenser together with the appropriate keg coupler or couplers.
Different breweries and keg systems use different keg valves, so make sure the correct coupler is selected for each keg being connected.
Depending on the kegs and products being served, you may also require:
The exact equipment required will depend on the keg type and product being dispensed.
The built-in compressor is particularly useful with KeyKeg and compatible bag-type kegs, where compressed air remains separated from the drink.
Conventional steel kegs can be dispensed using compressed air for short-term applications, but introducing air into the keg will affect the product over time. For longer-term use, connect the dispenser using the correct beverage gas and regulator.
Always confirm the correct keg coupler, dispense pressure and gas requirements for the product before connecting the keg.
