The Lindr 70/K Twin Tap Draught Beer Dispenser is a higher-capacity portable drinks dispenser featuring two draught taps, integrated dry cooling and a built-in air compressor.
With a continuous cooling output of approximately 60–80 litres per hour and a maximum output of up to 90 litres per hour, the Lindr 70/K is designed for events, mobile bars, breweries, taprooms and other applications requiring greater dispense capacity from a compact countertop unit.
The built-in compressor makes the 70/K particularly suitable for KeyKeg and compatible bag-type kegs, while conventional steel kegs can also be connected using the correct keg couplers and beverage gas setup.
The Lindr 70/K features two draught taps, allowing two compatible kegged products to be connected and dispensed from the same machine.
Depending on the complete dispense system, the two outlets can be used for compatible:
Each product should be connected using the correct keg coupler, pipework, pressure and gas arrangement for the particular keg and drink.
The Lindr 70/K provides approximately 60–80 litres per hour of continuous cooling capacity, with a maximum rated output of up to 90 litres per hour under suitable operating conditions.
The increased cooling capacity makes the 70/K suitable for applications requiring a higher dispense rate than smaller Lindr countertop dispensers.
The 70/K includes an integrated air compressor, removing the need for a separate external compressor.
For KeyKeg and compatible bag-type kegs, compressed air acts on the outside of the internal product bag and remains separated from the drink. This allows these keg types to be dispensed using the built-in compressor without requiring a separate beverage gas cylinder.
For conventional steel kegs, compressed air comes into contact with the product and should therefore only be considered for short-term dispense. For longer-term storage and dispense, use the correct CO2 or mixed beverage gas for the product.
The Lindr 70/K uses dry cooling technology, so there is no water bath to fill or ice bank to build before use.
Cooling time is approximately 2–4 minutes, allowing the dispenser to be set up relatively quickly compared with traditional water-bath cooling systems.
Combining higher cooling capacity with two taps and a built-in compressor, the Lindr 70/K is suitable for:
Actual dispense capacity will depend on factors including incoming product temperature, ambient conditions and the required serving temperature.
The Lindr 70/K can also be supplied with custom vinyl branding, making it suitable for breweries, drinks brands, event companies and promotional applications.
Contact us for details regarding artwork requirements, pricing and current lead times for custom vinyl-wrapped dispensers.
The dispenser is supplied with:
All necessary pipework can be supplied when purchasing the dispenser together with the appropriate keg coupler or couplers.
Depending on the kegs and products being served, you may also require:
The exact equipment required will depend on the keg valve and product being dispensed.
The built-in compressor is particularly useful with KeyKeg and compatible bag-type kegs, where compressed air remains separated from the drink.
Conventional steel kegs can be dispensed using compressed air for short-term applications, but introducing air into the keg will affect the product over time. For longer-term use, connect the dispenser using the correct beverage gas and regulator.
Always confirm the correct keg coupler, dispense pressure and gas requirements for the product before connecting the keg.
